wiring a ceiling fan with light to switch

Wire Coat hanger: Or something similar.Ladder: This will help you measure the ceiling to find the center but also to access the attic.Power Drill: You will need this to drill holes (normal drill bit and long drill bit) so you can feed a wire the ceiling and to screw the fan box in the ceiling.Braced Fan Box(es): The fan box is what you put in the ceiling to attach your fan/light fixture to the ceiling.You will also need this later on in the project to cut a hole above the light switch on the wall. Sheetrock saw: Once you find the center of the room, you will use a sheetrock saw to cut a hole.Tape Measure: You will use this to measure the center of your room to know where to put the ceiling fan/light.In order to do this project, you will need the following supplies: If you decide to take those on, there are a lot of YouTube videos that do cover those subjects.

Those tasks (the switch especially) should be left to a licensed electrician as improper wiring could result in injury, death, or fire. The steps that I recommend an electrician do such as wiring the electrical switch will not be covered in this post. However, doing the steps I recommend (and are covered in this post) will dramatically reduce your costs by slashing the amount of labor you’re paying for. Now, you could hire an electrician to do all these steps but that will be very pricey.

Take the outlet off the switch (Electrician).

Install the ceiling fan/light fixture (You or an Electrician).

Run a wire from the fan box to the switch (You).The whole process can be broken down into 5 parts: After that, call your electrician to wire the light switch, enjoy the money savings and the room’s new ambiance. In this guide, you will learn how to install a ceiling light (and fan) and get the wires from the light to your light switch. Thus, saving us a lot of money on the project by dramatically reducing the amount of labor we were paying for. (It was actually pretty easy and only took us a day to do this in all four bedrooms).Īfter we did that, we would only need an electrician at the end to wire the light switch and take the outlet off the light switch. We really wanted overhead lighting so that we could do a fan and light combo to keep the rooms cooler in the summer.Īfter doing a lot of research and consulting with an electrician, we learned we could install the fan box and run the wire to the light switch ourselves. Instead, they all had an outlet on a switch so you could plug a lamp in. All the bedrooms had no overhead lighting. When we moved into our new house a few weeks ago, one of the very first things we wanted to change was the lighting situation in the bedrooms.

Wiring a ceiling fan with light to switch